To configure a parallel printer port (PRN, LPT1, LPT2, or LPT3): MODE LPTn:COMm: To setup the parameters for a serial port.

The port number may be reported asin usebut you can disregard that at this point, if you know that nothing is currently using it.

Select the COM port Number dropdown box and select a COM port number 2, 3, or 4 (usually COM1 is already in use). You must be a member of the Administrators group to redirect printing. Click on thePort Settingstab, and then click the. Windows XP x86/ XP 圆4/ Vista x86/ Vista 圆4/ XP MCE/ 7 x86/ 7 圆4/ 8 圆4/ 8 x86/ 8.1 x86/ 8. To redirect output from a parallel port (PRN, LPT1, LPT2, or LPT3) to a serial port(COM1, COM2, COM3, etc). Updating BIOS improperly might cause system failure, please do not hesitate to contact us via E- Support if you need any assistance. We DO NOT recommend you to update BIOS while system is running. If the CPU, for example, wants to send information out on COM1, it writes to I/O port 0x3F8, as this I/O port is 'connected' to the UART IC register which holds the information that is to be sent out. * The listed Memory Speed only for references, the actual running speed will depend to the system specification. This is not a full listing but a memory guide used for testing. Please update system BIOS before upgrade your processor (CPU) to avoid system failureĭo Not Mix DDR3 and DDR3L memory modules. COM1 port: This is an RS-232 port that you can use to connect to an external serial communication device such as a modem. ※Biostar reserves the right to add or remove support for any OS with or without notice.Ĭaution!! The specification and pictures are subject to change without notice!

Supports Windows XP / Vista / 7/ 8/ 8.1/ 10 Micro ATX Form Factor Dimension: 17cm x 19.1cm ( W x L ) Realtek RTL8111H - 10/100/1000Mb/s ControllerĨ x USB 2.0 Ports (4 on rear I/Os and 4 via internal headers)ġ x PCI-E 3.0 x16 Slot (supported by Core i5 -3xxx / Core i7 3xxx CPU)Ģ x USB 2.0 Headers (each header supports 2 USB 2.0 ports)

Com1 port